HEIDENHAIN CNC PILOT 640 User Manual page 637

TURN PLUS | Machining information
Manual tool selection
TURN PLUS selects the tools depending on the machining
parameter Type of tool access WD. If TURN PLUS cannot find a
suitable tool in the specified lists, select the tools manually.
TURN PLUS automatically enters comparison parameters. With the
soft keys, you can select the list in which you want to look for the
tools.
Select the tool manually:
Press the Tool list soft key
Alternative: Press the Turret list soft key
Choose a tool from the list
Press the Load tool soft key to enter the tool in
the tool selection
Press the Apply soft key to conclude the tool
selection
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
7
637