HEIDENHAIN CNC PILOT 640 User Manual page 634

7
Machining sequence Milling, finishing
Main mach.
operation
Milling
*: Define the milling operation
Machining sequence Cut-off
Main mach.
operation
Cut-off
Machining sequence Rechucking
Main mach.
operation
Rechucking
634
TURN PLUS | Automatic working plan generation (AWG) submode
Anc. mach. Machining location
operation
– –
Front
–
Lateral
–
Contour, Slot –
milling, Pocket
(*)
Contour, Slot Front
milling, Pocket
(*)
Contour, Slot Lateral
milling, Pocket
(*)
Anc. mach. Machining location
operation
All –
Full-surface –
machining
Anc. mach. Machining location
operation
Full-surface –
machining
Design
Contour analysis:
contours
– Milling operation:
Sequence
Linear and circular slots
Open contours
Closed contours (pockets), single surfaces
and centric polygons
Sequence – Location:
Front (also machines Y front)
Lateral surface (also machines Y surface)
– then the elements are machined according to
the sequence of geometrical definition
Finish-machine all elements at all machining
locations
Finish-machine all elements on the front face
Finish-machine all elements on the lateral
surface
Finish selected element at all machining
locations
Finish selected element on the face
Finish selected element on the lateral surface
Execution
The workpiece is cut off
The workpiece is cut off and rechucked
Execution
The workpiece is rechucked.
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Determining the milling