HEIDENHAIN CNC PILOT 640 User Manual page 630

7
Machining sequence Thread cutting
Main mach.
operation
Thread cutting
630
TURN PLUS | Automatic working plan generation (AWG) submode
Anc. mach. Machining location
operation
All –
All Extnl.
All Internal
Cylinder –
Cylinder Extnl.
Cylinder Internal
Transverse –
Transverse Extnl.
Transverse Internal
Taper –
Taper Extnl.
Taper Internal
Execution
Contour analysis:
form elements
Sequence: First outside, then inside machining;
the elements are then machined according to
the sequence of geometrical definition
Machining cylindric (longitudinal), tapered and
transverse threads on the outside and inside of
a contour
Machining cylindric (longitudinal), tapered and
transverse threads on the outside of a contour
Machining cylindric (longitudinal), tapered and
transverse threads on the inside of a contour
Machining cylindric outside and inside threads
Machining cylindric outside threads
Machining cylindric inside threads
Machining transverse threads on the outside
and inside of the contour
Machining transverse threads on the outside
Machining transverse threads on the inside
Machining taper threads on the outside and
inside
Machining taper threads on the outside
Machining taper threads on the inside
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Determining the Thread