Deburring, Lateral Surface Unit - HEIDENHAIN CNC PILOT 640 User Manual

2
Further forms:
Further information:
Access to the technology database:
Machining operation: milling
Affected parameters: F, S, FZ, P

Deburring, lateral surface unit

The unit deburrs the contour defined with ICP on the lateral
surface.
Unit name: G840_ENT_C_MANT / cycle: G840
Further information:
Contour form:
FK: ICP contour number
NS: Starting block no. of contour – beginning of contour
section
NE: Contour end block no. – end of contour section
X1: Upper edge of milling
Cycle form:
JK: Cutter position
0: On the contour
1: Within/left of contour
2: Outside/right of contour
3: Depending on H and MD
H: Mill cutting direction
0: Up-cut
1: Climb
BG: Cham. width for deburring
JG: Preparation diameter
P: Plunging depth (indicated as a negative value)
K: Contour-parallel oversize
R: Approach radius
FZ: Approach feed (default: active feed rate)
E: Reduced feed
RB: Return plane
Further forms:
Further information:
Access to the technology database:
Machining operation: Deburring
Affected parameters: F, S
194
"smart.Turn unit", Page 78
"G840 – deburring", Page 423
"smart.Turn unit", Page 78
smart.Turn units | Units – milling, lateral surface (C axis)
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017