HEIDENHAIN CNC PILOT 640 User Manual page 53

NC programming | Fundamentals: smart.Turn editor
Config menu item
The menu item Config (configuring) contains the following
functions:
Input mode: Define the input mode
NC editor (word-by-word): The editor works in the NC
mode
Text editor (character): The editor works character by
character (no syntax checking)
Settings
Save: The editor memorizes the open NC programs and the
respective cursor positions
Load last saved setting: restores the last saved condition of
the editor
Technology data: starts the Technology editor submode
Misc menu item
The Misc (Miscellaneous) menu item contains the following
functions:
Inserting a block
W/o block no. Alt-N: The editor inserts an empty line at the
cursor position (without block number)
With block no. Ins: The editor inserts an empty line at
the cursor position (with block number) Alternative: When
you press the INS key, the editor inserts a block with block
number.
Comment at line end: The editor inserts a comment at the
end of the line in which the cursor is located
To edit word, Enter: You can edit the NC word at which the
cursor is located
To delete word, Del: The editor deletes the NC parameter at
the cursor position
Dissolve UNIT: Position the cursor to the first line of a unit
before selecting this menu item. The editor cancels the brackets
around the unit. The unit dialog can no longer be used for
this machining block, but you can edit the machining block as
desired
Block numbering...: The block numbering settings are the
starting block number
The first NC block receives the starting block number and the
block-number increment is added for each further NC block. The
settings for starting block number and block-number increment
can be selected specifically for every NC program
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
and the block-number increment.
1
53