Linear Pattern Drilling, Lateral Surface Unit - HEIDENHAIN CNC PILOT 640 User Manual

smart.Turn units | Units – Drilling in C axis

Linear pattern drilling, lateral surface unit

The unit machines a linear drilling pattern in which the individual
features are arranged at a regular spacing on the lateral surface.
Unit name: G74_Lin_Mant_C / cycle: G74
Further information: "Deep boring G74", Page 378
Pattern form:
Q: Number of holes
Z1: Start point pattern – position of first hole
C1: Start. angle
Wi: End angle – Angle increment
W: Final angle
Z2: End point pattern
Cycle form:
X1: Start point drill (diameter value)
X2: End point drill
E: Period of dwell at end of hole (default: 0)
D: Retraction type
0: Rapid traverse
1: Feed rate
V: Feed reduction
0: Without reduction
1: At end of the hole
2: At start of the hole
3: At start & end of hole
AB: Drilling lengths (default: 0)
P: 1. Boring depth
IB: Hole depth reduct. val – value by which the hole depth
decreases after every infeed.
JB: Minimum hole depth
If you have entered a hole depth reduction value, the hole depth
is reduced only to the value entered in JB.
B: Return distance – value by which the tool is retracted after
reaching the respective hole depth
RI: Safety clearance internal – distance for reapproach inside
the hole (default: Safety clearance SCK)
RB: Return plane (default: back to start position)
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
2
121