Sun Oracle SPARC Enterprise M9000 Installation Manual page 36

5. Remove the two (2) screws securing the left side cover of the expansion cabinet and
remove the cover.
Note – Be sure to remove the cover here because it cannot be removed after the units are
connected.
FIGURE 3-5
6. Connect the base cabinet and expansion cabinet by using the six (6) bolts supplied as
accessories.
Mount the connecting bolts in the directions indicated by the arrows in
Note – If the bolt holes are vertically misaligned, adjust their height by lowering the
leveling feet of the base or power cabinet.
3-8 SPARC Enterprise M8000/M9000 Servers Installation Guide • October 2012
Removing the Left Side Cover of the Expansion Cabinet
.
FIGURE 3-6