Sun Oracle SPARC Enterprise M9000 Installation Manual page 51

Note – If the bolt holes are vertically misaligned, adjust their height by lowering the
leveling feet of the power cabinet.
Connecting the Expansion Cabinet and the Power Cabinet
FIGURE 3-20
9. Referring to Section 3.2, "Securing the Base Cabinet" on page
cabinet.
Lower the four leveling feet adjusting them so that the cabinet can be level.
Note – Attach an accessory foot stand to each leveling foot.
Note – Lower the leveling foot until the weight of the cabinet is no longer supported by the
castors.
3-2, secure the expansion
Chapter 3 Installing the Server 3-23