Ipv6 Mpls L3Vpn Network Schemes And Functions; Protocols And Standards; Ipv6 Mpls L3Vpn Configuration Task List; Configuring Basic Ipv6 Mpls L3Vpn - HP MSR2000 Configuration Manual

The PEs use an IGP to ensure the connectivity between them.
3. From the egress PE to the remote peer CE.
The egress PE restores the original IPv6 routes and advertises them to the remote CE over an IPv6
static route, RIPng route, OSPFv3 route, IPv6 IS-IS route, EBGP, or IBGP route.

IPv6 MPLS L3VPN network schemes and functions

IPv6 MPLS L3VPN supports the following network schemes and functions:
Basic VPN.
•
Inter-AS VPN option A.
•
Inter-AS VPN option C.
•
Carrier's carrier.
•
• Multi-VPN-instance CE.
BGP AS number substitution and SoO.
•

Protocols and standards

RFC 4659, BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN

IPv6 MPLS L3VPN configuration task list

Tasks at a glance
(Required.)
(Optional.)
(Optional.)
(Optional.)

Configuring basic IPv6 MPLS L3VPN

The key task in IPv6 MPLS L3VPN configuration is to manage the advertisement of IPv6 VPN routes on the
MPLS backbone, including management of PE-CE route exchange and PE-PE route exchange.
To configure basic IPv6 MPLS L3VPN:
Tasks at a glance
Configuring VPN
1. (Required.)
2. (Required.)
3. (Optional.)
(Required.)
(Required.)
(Optional.)
Configuring basic IPv6 MPLS L3VPN
Configuring inter-AS IPv6 VPN
Configuring routing on an MCE
Configuring BGP AS number substitution and SoO attribute
instances:
Creating a VPN instance
Associating a VPN instance with an interface
Configuring route related attributes for a VPN instance
Configuring routing between a PE and a CE
Configuring routing between PEs
Configuring BGP VPNv6 route control
305