Specifying The Vpn Label Processing Mode On The Egress Pe - HP MSR2000 Configuration Manual

Step
7. Redistribute
routes of the VPN site.
8. (Optional.)
filtering
routes.
9. (Optional.)
filtering of received routes.
Configuring IBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance view.
4. Configure the PE as an IBGP
peer.
5. Enter BGP-VPN IPv4 unicast
address family view.
6. Enable BGP to exchange IPv4
unicast routes with the peer.
7. Redistribute the VPN routes of
the VPN site.
8. (Optional.) Configure filtering
of advertised routes.
9. (Optional.) Configure filtering
of received routes.
Specifying the VPN label processing mode on the
egress PE
An egress PE can process VPN labels in either POPGO or POP mode:
• POPGO forwarding—Pops the label and forwards the packet out of the egress interface
corresponding to the label.
POP forwarding—Pops the label and forwards the packet through the FIB table.
•
To specify the VPN label processing mode on an egress PE:
Command
import-route protocol [ process-id |
the VPN
all-processes ] [ allow-direct | med
med-value | route-policy
route-policy-name ] *
Configure
filter-policy { acl-number | prefix-list
of advertised
prefix-list-name } export [ protocol
process-id ]
Configure
filter-policy { acl-number | prefix-list
prefix-list-name } import
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name | ip-address }
as-number as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol [ process-id |
all-processes ] [ allow-direct | med
med-value | route-policy
route-policy-name ] *
filter-policy { acl-number | prefix-list
prefix-list-name } export [ protocol
process-id ]
filter-policy { acl-number | prefix-list
prefix-list-name } import
215
Remarks
By default, no routes are
redistributed into BGP.
By default, BGP does not filter
advertised routes.
Optional.
By default, BGP does not filter
received routes.
Remarks
N/A
N/A
N/A
N/A
N/A
By default, BGP does not
exchange IPv4 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.
By default, BGP does not filter
advertised routes.
Optional.
By default, BGP does not filter
received routes.