Ietf Ds-Te Configuration Example - HP MSR2000 Configuration Manual

Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display mpls lsp command on Router B. The output shows that the current bypass tunnel that
protects the primary CRLSP is Tunnel 50.
[RouterB] display mpls lsp
FEC
2.2.2.2/51/16802
2.2.2.2/1/16802
Backup
2.2.2.2/50/16802
3.2.1.2
3.3.1.2
# Execute the display rsvp lsp verbose command on Router A to display detailed information about MPLS
TE tunnel 1, the tunnel for the primary CRLSP. The output shows that Tunnel1 is protected by the bypass
tunnel Tunnel 50, and the protected node is 3.1.1.1.
[RouterA] display rsvp lsp tunnel-id 1 verbose
Tunnel name: Tunnel1
Destination: 4.4.4.4
Tunnel ID: 1
LSR type: Ingress
Setup priority: 7
In-Label: -
In-Interface: -
Nexthop: 2.1.1.2
Include-Any: 0
Average bitrate: 0 kbps
Path MTU: 1500
RRO number: 12
2.1.1.1/32
2.1.1.2/32
1150
2.2.2.2/32
3.1.1.1/32
3.1.1.2/32
1151
3.3.3.3/32
4.1.1.1/32
4.1.1.2/32
3
4.4.4.4/32
Fast Reroute protection: Ready
FRR inner label: 3

IETF DS-TE configuration example

Network requirements
Router A, Router B, Router C, and Router D run IS-IS and all of them are Level-2 routers.
: Disabled
: -
: -
Proto In/Out Label
RSVP -/3
RSVP -/1151
-/3
RSVP -/3
Local -/-
Local -/-
Flag: 0x00 (No FRR)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Flag: 0x09 (FRR Avail/Node-Prot)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Flag: 0x00 (No FRR)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Bypass tunnel: Tunnel50
127
Auto Bandwidth Freq
Max Bandwidth
Interface/Out NHLFE
POS2/2/0
GE2/1/2
Tun50
POS2/2/1
POS2/2/1
POS2/2/0
Source: 1.1.1.1
LSP ID: 16802
Direction: Unidirectional
Holding priority: 7
Out-Label: 1150
Out-Interface: GE2/1/1
Exclude-any: 0
Include-all: 0
Maximum burst: 1000.00 bytes
Class type: CT0
: -
: -