HP MSR2000 Configuration Manual page 198

To create and configure a VPN instance:
Step
1. Enter system view.
2. Create a VPN instance and
enter VPN instance view.
3. Configure an RD for the VPN
instance.
4. (Optional.)
description
instance.
5. (Optional.) Configure a VPN
ID for the VPN instance.
6. (Optional.)
SNMP context for the VPN
instance.
The following matrix shows the maximum number of VPN instances that can be created in the system:
Hardware
MSR2000
MSR3000
MSR4000
Associating a VPN instance with an interface
After creating and configuring a VPN instance, associate the VPN instance with the interface connected
to the CE.
To associate a VPN instance with an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Associate a VPN instance with
the interface.
Configuring route related attributes for a VPN instance
Step
1. Enter system view.
Command
system-view
ip vpn-instance vpn-instance-name
route-distinguisher
route-distinguisher
Configure a
for the VPN
description text
vpn-id vpn-id
Configure an
snmp context-name context-name
Command
system-view
interface interface-type
interface-number
ip binding vpn-instance
vpn-instance-name
Command
system-view
Maximum value
1023
2047
4095
189
Remarks
N/A
By default, no VPN instance is
created.
By default, no RD is specified for a
VPN instance.
By default, no description is
configured for a VPN instance.
By default, no VPN ID is configured
for a VPN instance.
By default, no SNMP context is
configured.
Remarks
N/A
N/A
By default, no VPN instance is
associated with an interface.
The ip binding vpn-instance
command deletes the IP address of
the current interface. You must
reconfigure an IP address for the
interface after configuring the
command.
Remarks
N/A