HP MSR2000 Configuration Manual page 158

Step
4. Enable RSVP authentication for
the RSVP neighbor and specify
the authentication key.
5. Enable challenge-response
handshake for the RSVP
neighbor.
6. Configure the idle timeout for
the RSVP security associations
with the RSVP neighbor.
7. Specify the maximum number
of out-of-sequence RSVP
authentication messages that
can be received from the RSVP
neighbor.
To configure RSVP authentication in interface view:
Step
1. Enter system view.
Enter interface view.
2.
3. Enable RSVP authentication on
the interface and configure the
authentication key.
4. Enable challenge-response
handshake on the interface.
5. Configure the idle timeout for
RSVP security associations on
the interface.
6. Specify the maximum number
of out-of-sequence RSVP
authentication messages that
can be received on the
interface.
To configure RSVP authentication in RSVP view:
Step
1. Enter system view.
2. Enter RSVP view.
3. Enable RSVP authentication
globally and configure the
authentication key.
4. Enable challenge-response
handshake globally.
Command
authentication key { cipher |
plain } auth-key
authentication challenge
authentication lifetime life-time
authentication window-size
number
Command
system-view
interface interface-type
interface-number
rsvp authentication key { cipher |
plain } auth-key
rsvp authentication challenge
rsvp authentication lifetime
life-time
rsvp authentication window-size
number
Command
system-view
rsvp
authentication key { cipher |
plain } auth-key
authentication challenge
149
Remarks
By default, RSVP authentication is
disabled.
By default, the challenge-response
handshake function is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, RSVP authentication is
disabled.
Do not enable both RSVP
authentication and FRR on the
same interface.
By default, the challenge-response
handshake function is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, RSVP authentication is
disabled.
By default, the challenge-response
handshake function is disabled.