Specifying A Dscp Value For Outgoing Rsvp Packets; Configuring Rsvp Gr - HP MSR2000 Configuration Manual

Step
5. Configure the global idle
timeout for RSVP security
associations.
6. Specify the global RSVP
authentication window
size—the maximum number of
RSVP authenticated messages
that can be received out of
sequence.

Specifying a DSCP value for outgoing RSVP packets

The DSCP value of an IP packet specifies the priority level of the packet and affects the transmission
priority of the packet.
To specify a DSCP value for outgoing RSVP packets:
Step
1. Enter system view.
2. Enter RSVP view.
3. Specify a DSCP value for
outgoing RSVP packets.

Configuring RSVP GR

RSVP GR depends on the RSVP hello extension function. When configuring RSVP GR, you must enable
RSVP hello extension.
Perform this task on GR-capable devices.
To configure RSVP GR:
Step
1. Enter system view.
2. Enter RSVP view.
3. Enable GR for RSVP.
4. Return to system view.
5. Enter interface view.
6. Enable RSVP hello extension.
Command
authentication lifetime life-time
authentication window-size
number
Command
system-view
rsvp
dscp dscp-value
Command
system-view
rsvp
graceful-restart enable
quit
interface interface-type
interface-number
rsvp hello enable
150
Remarks
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, the DSCP value is 48.
Remarks
N/A
N/A
By default, RSVP GR is disabled.
N/A
N/A
By default, RSVP hello extension is
disabled.