Displaying And Maintaining Mpls L2Vpn - HP MSR2000 Configuration Manual

Step
3. Enter cross-connect view.
4. Enable interworking for the
cross-connect.

Displaying and maintaining MPLS L2VPN

Execute display commands in any view and the reset command in user view.
Task
Display LDP PW label information.
Display cross-connect forwarding
information (MSR2000/MSR3000).
Display cross-connect forwarding
information (MSR4000).
Display L2VPN information for the
Layer 3 interface bound to a
cross-connect.
Display L2VPN PW information.
Display PW class information.
Display cross-connect group
information.
Display L2VPN label block
information.
Display BGP L2VPN peer group
information.
Display L2VPN label block
information maintained by BGP.
Display BGP L2VPN peer information.
Display BGP L2VPN update group
information.
Reset BGP sessions for L2VPN.
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp l2vpn commands, see Layer 3—IP Routing Command Reference.
Command
connection connection-name
interworking ipv4
Command
display l2vpn ldp [ peer ip-address [ pw-id pw-id ] | xconnect-group
group-name ] [ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group group-name ]
[ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group group-name ]
[ slot slot-number ] [ verbose ]
display l2vpn interface [ xconnect-group group-name | interface-type
interface-number ]
display l2vpn pw [ xconnect-group group-name ] [ protocol { bgp |
ldp | static } ] [ verbose ]
display l2vpn pw-class [ class-name ]
display l2vpn xconnect-group [ name group-name ] [ verbose ]
display l2vpn bgp [ peer ip-address | local ] [ xconnect-group
group-name ] [ verbose ]
display bgp group l2vpn [ group-name group-name ]
display bgp l2vpn signaling [ peer ip-address { advertised | received }
[ statistics ] | route-distinguisher route-distinguisher [ site-id site-id
[ label-offset label-offset [ advertise-info ] ] ] | statistics ]
display bgp peer l2vpn [ group-name group-name log-info |
ip-address { log-info | verbose } | verbose ]
display bgp update-group l2vpn [ ip-address ]
reset bgp { as-number | ip-address | all | external | group
group-name | internal } l2vpn
390
Remarks
N/A
By default, the cross-connect does
not support interworking.