HP MSR2000 Configuration Manual page 332

Step
5. (Optional.) Configure filtering
of advertised routes.
6. Return to system view.
7. Enter interface view.
8. Enable the OSPFv3 process on
the interface.
Configuring IPv6 IS-IS between an MCE and a PE
Step
1. Enter system view.
2. Create an IS-IS process for an
IPv6 VPN instance and enter
IS-IS view.
3. Configure a network entity title.
4. Enable IPv6 for the IS-IS
process.
5. (Optional.) Redistribute VPN
routes.
6. (Optional.) Configure filtering
of advertised routes.
7. Return to system view.
8. Enter interface view.
9. Enable the IPv6 IS-IS process
on the interface.
Configuring EBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance view.
Command
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
[ instance instance-id ]
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
ipv6 import-route protocol
[ process-id ] [ allow-ibgp ]
[ allow-direct | cost cost | [ level-1
| level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
ipv6 filter-policy { acl6-number |
prefix-list prefix-list-name |
route-policy route-policy-name }
export [ protocol [ process-id ] ]
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
323
Remarks
By default, redistributed routes are
not filtered.
N/A
N/A
By default, OSPFv3 is disabled on
an interface.
Remarks
N/A
N/A
By default, no NET is configured.
By default, IPv6 is disabled.
By default, IPv6 IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route level
in the command, the command
redistributes routes to the level-2
routing table.
By default, IPv6 IS-IS does not filter
advertised routes.
N/A
N/A
By default, IPv6 IS-IS is disabled on
an interface.
Remarks
N/A
N/A
N/A