HP MSR2000 Configuration Manual page 319

Step
2. Create an IPv6 IS-IS process for
a VPN instance and enter IS-IS
view.
3. Configure a network entity title
for the IS-IS process.
4. Enable IPv6 for the IS-IS
process.
5. Return to system view.
6. Enter interface view.
7. Enable IPv6 for the IS-IS
process on the interface.
Configuring EBGP between a PE and a CE
1. Configure the PE:
Step
1. Enter system view.
2. Enable BGP and enter BGP
view.
3. Enter
view.
4. Configure the CE as the VPN
EBGP peer.
5. Create the BGP-VPN IPv6
unicast address family and
enter its view.
6. Enable IPv6 unicast route
exchange with the specified
peer or peer group.
7. Redistribute the routes of the
local CE.
8. (Optional.)
filtering of advertised routes.
Command
system-view
bgp as-number
BGP-VPN instance
ip vpn-instance
vpn-instance-name
peer { group-name |
ipv6-address } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
filter-policy { acl6-number |
Configure
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
Command
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
310
Remarks
Perform this configuration on the
PE. On the CE, create a common
IPv6 IS-IS process.
By default, no NET is configured.
IPv6 is disabled by default.
N/A
N/A
IPv6 is disabled on an interface by
default.
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
By default, the BGP-VPN IPv6
unicast address family is not
created.
Configuration commands in
BGP-VPN IPv6 unicast address
family view are the same as
those in BGP IPv6 unicast
address family view. For more
information, see Layer 3—IP
Routing Configuration Guide.
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
A PE must redistribute the routes
of the local CE into its VPN
routing table so that it can
advertise them to the peer PE.
By default, BGP does not filter
advertised routes.