The Ip 266 In A Simatic S5 System - Siemens SIMATIC S5 Manual

System Overview
1.3 Installing the IP 266 in a SIMATIC S5 System
PLC
interface
Setpoint
Command
assign-
interpreter
ment
Programmer
port
Figure 1-3. The IP 266 in a SIMATIC S5 System
The IP 266 can be plugged into a bus module slot for analog modules (slot 0 to 7).
In addition to the wiring backplane, the IP 266 is also equipped with interfaces
for connecting
• a programmer (PG 635, 675, 685, 730, 750)
• power electronics equipment with speed controller over the analog output
• 8 digital inputs/outputs for limit switches, reference point switches, ...
• an incremental position encoder (rotary or linear)
1-6
Data bus
Position
Power
controller
section
DAC
IP266
IP 266
9 V
Data
GND
M
T
EWA 4NEB 812 6057-02