Siemens SIMATIC S5 Manual page 7

IP 266
Training courses
Siemens offers an extensive range of training courses for the SIMATIC STEP 5
system.
For details, please contact your local Siemens branch office.
Reference literature
This manual deals primarily with the IP 266 positioning module. Other com-
ponents of the SIMATIC S5 system are mentioned only briefly.
Detailed information on these components can be found in the following
literature:
• Programming Primer for the SIMATIC S5-100U
Practical exercises on the PG 615 programmer
Siemens AG, Berlin and Munich, 1988
Contents:
- Configuration and installation of the S5-100U
- Introduction to programming on the PG 615 programmer
Order No.: ISBN 3-8009-1500-6
• Programmable Controllers
Volume 1: Logic and Sequence Control Systems; from the
Control Task to the Control Program
Günter Wellenreuther, Dieter Zastrow
Braunschweig 1987
Contents:
- Operating principles of a programmable controller
- Theory of control technology using the STEP 5 programming language for
the SIMATIC S5 programmable controllers
Order No.: ISBN
EWA 4NEB 812 6057-02
3-528-04464-0
Introduction
x
i