Siemens SIMATIC S5 Manual page 180

IP 266
Function key menu:
<F1> Press this key to branch to the screen forms for entering
• machine data and
• traversing (machining) programs.
<F2> Press this key to display
• machine data and
• traversing (machining) programs.
<F3> This key is used to invoke the branch of the program used to test modes
1 to 19, and may be pressed in "ONLINE" mode only.
<F4> Press this key to invoke the "Transfer" function.
This function is used to transfer
• machine data or
• traversing (machining) programs from memory to various storage
media.
<F5> Press this key to invoke the "Delete" function.
This function is used to delete
• machine data and
• traversing (machining) programs from various storage media.
<F7> If you want to find out which machine data and traversing (machining)
programs are on which storage media, press this key to invoke the
"Information" function.
<F8> This key returns you to the "PRESETS" form.
EWA 4NEB 812 6057-02
Fundamentals of COM 266
6-13