Siemens SIMATIC S5 Manual page 214

IP 266
Field name Type
Function 1 [L] I Enter a number in this field when you want to invoke a subroutine. If an
entry is made in this field, the text "Subroutine no." is displayed.
Function 2 [G] I Press <F7> to display the available G functions. An error message is
displayed if you enter any G function not in this list.
Function 3 [X] I Enter a target position in this field. How this target position is inter-
preted depends on the entry in the "Dimensions" field.
Function 4 [F] I The contents of this field depend on the preceding function in the
traversing (machining) block.
If the preceding
function is...
an X function
G04
G24
Function 5 [M] I An M function is output at the beginning of a block.
Function
M00
M02
M99
M01 and
M03 to M98
No further blocks may be appended following an M02 function.
"Type" column: I = input field
EWA 4NEB 812 6057-02
Fundamentals of COM 266
Description
... the following is displayed:
Text Value
Feed rate: 400
Dwell time 1000
Loop pass:
Output
Text
Program stop
Program end
Unit
mm/min
msec
5
Number
00
02
99
01 or
03 to 98
6-47