Siemens SIMATIC S5 Manual page 178

IP 266
Function key menu:
<F1> This key
• takes you to the next screen form and
• forwards the initialization data to the module when correct entries
have been made in all input fields.
<F2> This key is used to switch back and forth between "ONLINE" and
"OFFLINE" in the "Mode" field.
The following values are read out from the module and displayed in the
screen form in "ONLINE" mode:
• Module number
• Slot number
• Firmware version
The first time COM 266 is started, the module number and slot number
fields are "0".
These fields are not displayed in "OFFLINE" mode.
<F7> This key is used to display a list of available
• drives or
• file names.
<F8> Press this key to return to the "CONFIGURATION" menu.
And what now?
Fill in all input fields in the "PRESETS" form.
Press <F1> to display the "FUNCTION SELECT" form.
EWA 4NEB 812 6057-02
Fundamentals of COM 266
6-11