Siemens SIMATIC S5 Manual page 198

IP 266
Data area:
Field name Type
Module O You already entered the parameters for these fields on page 1.
Meas.System
Axis type
Zero offset 1 to 4 I Each of the four zero offsets is independent of the others, and can also
be activated in traversing (machining) programs via G54 to G57. These
values are added to the offsets used in modes 12 and 13.
If several ZOs are used in a traversing (machining) program, they are not
added; instead, they replace the existing ZOs.
For instance, a zero offset set with G54 would be overwritten by a zero
offset set with G56.
"Type" column: I = input field, O = output field
Function key menu:
The function key menu is identical to that on page 2 of "INPUT MACHINEDATA".
And what now?
Fill in the fields for the zero offsets.
Press <F1> to screen page 6 of "INPUT MACHINEDATA".
EWA 4NEB 812 6057-02
Fundamentals of COM 266
Description
6-31