Siemens SIMATIC S5 Manual page 176

IP 266
Data area:
Field name Type
Drive: Specifies the current drive.
Filename: I The filename specifies the file in which your data blocks are to be stored.
You can thus assign different files to different projects or plants. Press
<F7> to display files with file extension 266.
Plant I An entry in this field is mandatory.
designation: If the field is blank, the error message "Inadmissible input" is displayed.
Enter a short characterizational text in this field.
Generated by: I An entry in this field is mandatory.
Enter your name. If you entered the name of an existing file under
"Filename", a name will automatically appear in this field.
Generated on: O If you entered the name of an existing file, its creation date is displayed
in this field.
If you are creating a new file, the current date and time is displayed.
Mode: O Operational status "ONLINE" or "OFFLINE". You can change back and
forth between the two with <F2>, but "ONLINE" will appear only
when the programmer is interfaced to the IP.
"Type" column: I = input field, O = output field
EWA 4NEB 812 6057-02
Fundamentals of COM 266
Description
6-9