Stopping The Cooking; Setting The Energy Save Mode; Using The Hot Blast Auto Features - Samsung MC28M6055C Series User Manual

Table of Contents

Advertisement

Oven use

Stopping the cooking

You can stop cooking at any time so that you can:
Check the food
Turn the food over or stir it
Leave it to stand
To stop the cooking...
Then...
Temporarily
Open the door or press the STOP/ECO button once.
Cooking stops.
To resume cooking, close the door again and press
the START/+30s button.
Completely
Press the STOP/ECO button once.
Cooking stops.
If you wish to cancel the cooking settings, press the
STOP/ECO button again.

Setting the energy save mode

The oven has an energy save mode.
NOTE
Auto energy saving function
If you do not select any function when appliance is in the middle of setting or
operating with temporary stop condition, function is canceled and clock will be
displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
14 English
Untitled-2 14
Press the STOP/ECO button.
Display off.
To remove energy save mode, open the
door or press the STOP/ECO button and
then display shows current time. The
oven is ready for use.

Using the hot blast auto features

The 20 Hot Blast Auto features include/provide pre-programmed cooking times.
You do not need to set either the cooking times or the power level. You can adjust
the size of the serving by turning the Multi Function Selector Dial.
CAUTION
Use only recipients that are microwave-safe.
Open the door. Place the food in the centre of the turntable. Close the door.
1. Press the Hot Blast Auto button.
2. Select the cook category that you are
2
3
3. Select the type of food by turning the
4. Press the START/+30s button.
4
cooking by turning the Multi Function
Selector Dial. Refer to the table on the
following page for a description of the
various preprogrammed settings.
Multi Function Selector Dial.
The food is cooked according to the pre-
programmed setting selected. When it
has finished.
1) The oven beeps 4 times.
2) The end reminder signal will beep 3
times (once every minute).
3) The current time is displayed again.
2017-04-17
11:34:26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents