Figure 98 Configure Ports Screen; Figure 99 Configure Kvm Port Screen; In-Band Access For Serial, Kvm, And Generic Ports - Raritan Command Center CC-SG Administrator's Manual

C 6: C P
HAPTER ONFIGURING ORTS AND
Configure a KVM Port
1. Click on the Devices tab and select a KVM device from the Devices tree.
2. On the Devices menu, click Port Manager, and then click Configure Ports. The Configure
Ports screen appears.
3. To make ports easier to find, click on a column header to sort the ports by that attribute in
ascending order. Click on the header again to sort the ports in descending order.
4. Click the Configure button that corresponds to the KVM port line item you wish to configure.
The Configure KVM Port screen appears.
P G
ORT ROUPS

Figure 98 Configure Ports Screen

Figure 99 Configure KVM Port Screen

81