Disconnect Users; Figure 92 Disconnect Users; Disconnect Users From Port - Raritan Command Center CC-SG Administrator's Manual

74
Examples are as follows:
E
XAMPLE
KX?
KX*
KX[0-9][0-9]T

Disconnect Users

Administrators can terminate any user's session with a device. This includes users who are
performing any kind of operation on a device, such as, connecting to ports, backing up the
configuration of a device, restoring a device's configuration, or upgrading the firmware of a
device. The administrator, however, will remain logged into CC-SG.
Note: Firmware upgrades and device configuration backups and restores are allowed to
complete before the user's session with the device is terminated. All other operations will be
terminated immediately.
1. Click on the Devices tab.
2. Right-click on the device you want to disconnect one or more users.
3. Click Disconnect Users.
4. Highlight one or more users in the Disconnect users panel.
5. Click Disconnect.
Note: For Dominion SX devices only, you can disconnect users who are directly logged onto the
device as well as those who are connected to the device (port) via CC-SG.
C C
OMMAND
D
ESCRIPTION
Locates KX1, and KXZ, but not KX1Z
Locates KX1, KX, KX1, and KX1Z
Locates KX95T, KX66T, but not KXZ and KX5PT

Figure 92 Disconnect Users

S G A
ENTER ECURE ATEWAY DMINISTRATOR
.
.
G
UIDE
.