Delete Device Group; Add Device Rule; Figure 86 Device Groups Manager Screen; Figure 87 Delete Device Group Window - Raritan Command Center CC-SG Administrator's Manual

C 5:
HAPTER ADDING DEVICES AND DEVICE

Delete Device Group

1. On the Associations menu, click Groups Manager, and then click Device Group Manager.
The Device Groups Manager screen appears.
2. Click on the Group Names drop down arrow and select the device group to be deleted. Click
Delete and the Delete Device Group window appears.
3. Click Yes to delete the group or No to Cancel and close the window.
4. Click Close to close Device Groups Manager screen.
5. Repeat steps 1 through 4 to delete other devices.

Add Device Rule

After adding a device group, apply one or more rules to the group so that devices can be grouped
by matching parameters and you have a navigable Devices tree.
1. On the Associations menu, click Groups Manager, and then click Device Group Manager.
The Device Groups Manager screen appears.
2. Click on the Group Name drop-down arrow and select the device group for which you want
to set rules.
3. Click on the Prefix, Category, Operator, and Element drop-down arrows to set up a rule,
and type the name of the rule in the Rule Name field.
4. Click Add Rule. The new rule appears in the rule table as a short regular expression.
G
ROUPS

Figure 86 Device Groups Manager Screen

Figure 87 Delete Device Group Window

Figure 88 Device Groups Manager Screen

71