Policy Manager; Add Policy; Figure 132 Policy Manager Screen; Figure 133 Add Appliance Policy Window - Raritan Command Center CC-SG Administrator's Manual

110

Policy Manager

Policy Manager commands allow you to add, edit, delete, and assign policies to Device and Port
groups. Policies give users rights to allow or deny access to groups. Please see Appendix C:
Initial Setup Process Overview for more information on using policies.

Add Policy

1. On the Associations menu, click Policy Manager. The Policy Manager screen appears.
2. Click Add to add a new policy. The Add Policy window appears.
3. Type the name of the new policy in the Enter Policy Name field.
4. Click OK to add the new policy or Cancel to close the window. If you clicked OK, the new
policy name appears in the Name field.
5. Click on the Device Group drop-down arrow and select a device group.
6. Click on the Port Group drop-down arrow and select a port group.
7. Click on the up or down arrows in the Start Time and End Time fields to assign a starting
time and an ending time during a 24-hour period for this policy to be in effect.
8. Select the appropriate option buttons for this policy to be in effect: Any to apply policy every
day, Weekday to apply policy every working day, Weekend to apply policy Saturdays and
Sundays, and Custom to manually choose the days policy to be applied. If you choose
Custom, check on the days of the week to apply the policy.
9. Select a permission type: Deny or Control, in the Permission field.
C C
OMMAND ENTER

Figure 132 Policy Manager Screen

Figure 133 Add Appliance Policy Window

S G A
ECURE ATEWAY DMINISTRATOR
G
UIDE