Figure 202 New Connection Wizard; Figure 203 Connection Name; Figure 204 Phone Number To Dial - Raritan Command Center CC-SG Administrator's Manual

168
4. Click Next.
5. Click Connect to the network at my workplace.
6. Click Dial-up connection.
7. Type a name for CC-SG, for example CommandCenter.
8. Type the phone number used to connect to CC-SG and click Next. This is NOT the dial-back
number that was configured as the Client phone under the Modem tab in Configuration
Manager on CC-SG.
9. A smart card is not necessary to dial into CC-SG. If you are not using one, click Do not use
my smart card for this connection and click Next.
C C
OMMAND ENTER

Figure 202 New Connection Wizard

Figure 203 Connection Name

Figure 204 Phone Number to Dial

S G A
ECURE ATEWAY DMINISTRATOR
G
UIDE