Scheduled Tasks; Entering Maintenance Mode; Exiting Maintenance Mode; Figure 191 Enter Maintenance Mode - Raritan Command Center CC-SG Administrator's Manual

160

Scheduled Tasks

Scheduled tasks cannot execute while CC-SG is in Maintenance Mode─please see section Task
Manager in Chapter 12: Advanced Administration for additional information on scheduled
tasks. When CC-SG exits Maintenance Mode, scheduled tasks will be executed as soon as
possible.

Entering Maintenance Mode

To enter Maintenance Mode:
1. On the Setup menu, click Maintenance Mode.
2. Click Enter Maintenance Mode.
3. Type a broadcast message or accept the default that is provided.
4. Type a number that will start a count down clock on each CC-SG client. Type a number
between 0 and 30. Default is 5. Typing 0 means that Maintenance Mode is starting
immediately.
5. Click OK.

Exiting Maintenance Mode

To exit Maintenance Mode:
1. On the Setup menu, click Maintenance Mode.
2. Click Exit Maintenance Mode.
C C
OMMAND ENTER

Figure 191 Enter Maintenance Mode

S G A
ECURE ATEWAY DMINISTRATOR
G
UIDE