Upgrade Cc-Sg; Restart Cc-Sg; Figure 185 Upgrade Cc-Sg Screen; Figure 186 Restart Screen - Raritan Command Center CC-SG Administrator's Manual

C 11: S M
HAPTER YSTEM AINTENANCE

Upgrade CC-SG

Note: If you are operating a CC-SG cluster, you must remove the cluster first and upgrade each
node separately.Before you can upgrade CC-SG, you must be in Maintenance Mode. See section
Maintenance Mode in Chapter 11: System Maintenance for additional information.
1. On the Setup menu, click Upgrade CommandCenter. The Upgrade CommandCenter
screen appears.
2. If you are upgrading from an older CC-SG, click Browse and navigate to the current location
of your CC files.
3. Click OK.

Restart CC-SG

1. On the Setup menu, click Restart CommandCenter. The Restart CommandCenter screen
appears.
2. Type your password in the Password field.
3. Accept the default message or type a message to display to any users currently online in the
Broadcast message field (for example, you might give users a brief time period to finish
their tasks in CC-SG or tell them why you are restarting the system). All users will be
disconnected when you restart CC-SG.
4. Type how much time (in minutes) should pass before CC-SG restarts in the Restart after
(min) field.

Figure 185 Upgrade CC-SG Screen

Figure 186 Restart Screen

157