Change User Password; Change Own Password; Figure 118 Change User Password Screen; Figure 119 Change My Profile Screen - Raritan Command Center CC-SG Administrator's Manual

C 7: A U
HAPTER DDING SERS AND
5. Check the Force Change Password Periodically check box if you want this user to have to
change his or her password from time to time and specify an expiration period for this user's
password in the Expiration Period field.
6. Check the Force strong password check checkbox if you want to enforce strong passwords
for this user–see Strong Password Rules in Chapter 12: Advanced Administration for
additional information.
7. Type an email address for the user.
8. Click OK to submit the changes or Cancel to exit without saving. An Updated Successfully
message confirms the edits were submitted.
9. Repeat steps 1 through 8 to edit other users.

Change User Password

This command allows you to change any user's password.
1. Click on the Users tab and select a user from the Users tree
2. On the User menu, click Change User Password. The Change User Password screen
appears.
3. Type the new password in the Password field.
4. Re-type password in the Retype Password field.
5. Click OK to change user password or Cancel to exit without saving. A User Password
Updated Successfully message confirms the password has been changed.
6. Repeat steps 1 through 5 to change other users' passwords.
Note: For strong passwords, minimum length is 6 characters. For non-strong passwords,
minimum length is 4 characters. See section Configure Security in Chapter 12: Advanced
Administration for additional information.

Change Own Password

For security reasons, you may choose to change your own password.
1. On the Session menu, click Change My Profile. The Change My Profile screen appears.
U G
SER ROUPS

Figure 118 Change User Password Screen

Figure 119 Change My Profile Screen

95