Apply Policies To User Groups; Figure 32 Update Policy Window; Figure 33 Edit User Group Policies Screen - Raritan Command Center CC-SG Administrator's Manual

32
Sundays, and Custom to manually choose the days policy to be applied. If you choose
Custom, check on the days of the week to apply the policy.
9. Click on a Permission value to select a permission type: Deny, or Control.
10. Click Update to add the policy. The Update Policy window appears.
11. Click Yes to add the policy or No to close the window.
12. Click Close to close the Policy Manager screen.
13. Repeat steps 1 through 12 to add other policies.

Apply Policies to User Groups

A user group does not specify the ports that can be accessed by the group and a policy does.
Therefore, you need to apply a policy to a user group.
1. Click on the Users tab and select a group.
2. On the User menu, click Edit User Group Policies. Alternatively, right-click on a user group
and select Edit User Group Policies. The Edit User Group Policies screen appears.
3. Scroll up or down to view all policies in this list. Click on a line item in the Policies list
(under the All Policies panel) that you wish to assign to the group. Click on the Day(s) check
boxes to select which days of the week the policy should be assigned.
4. Click Add to add the policy to the Selected Policies panel and assign it to the group.
5. To remove an assigned policy from the Selected Policies list, select the policy line item and
click Delete.
C C
OMMAND ENTER

Figure 32 Update Policy Window

Figure 33 Edit User Group Policies Screen

S G A
ECURE ATEWAY DMINISTRATOR
G
UIDE