Configuring Park Actions; Configuring Privacy Mask - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome
3. Click Set to save the position.

Call/delete an Initial Position:
You can click to call the initial position. You can click
restore the factory default initial position.

5.4.4 Configuring Park Actions

Purpose:
This feature allows the speed dome to start a predefined park action (scan, preset, pattern and
etc.) automatically after a period of inactivity (park time).

Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.

varies depending on
Pattern function
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action
2. Check the checkbox of Enable Park Action.
3. Set the Park Time as the inactivity time of the speed dome before it starts the park actions.
4. Choose Action Type the from the dropdown list.
5. Select the Action Type ID from the dropdown list.
6. Click

5.4.5 Configuring Privacy Mask

Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
speed dome
Figure 5-29 Set the Park Action
Figure 5-30 Action Types
to save the settings.
to delete the initial position and
models.
61