Setting / Calling A Pattern - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome

4.4.6 Setting / Calling a Pattern

Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be called on the
pattern settings interface. There are up to 4 patterns for customizing.
Pattern function varies depending on speed dome models.

Setting a Pattern:
Steps:
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Figure 4-12.
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the information of
PROGRAM PATTERN REMAINNING MEMORY(%) is displayed on the screen.
 Pan the speed dome to the right or left.
 Tilt the speed dome up or down.
 Zoom in or out.
Figure 4-11 Patrol Path 8
to enter the pattern settings interface.
Figure 4-12 Patterns Settings Interface
28