Configuring Video Tampering Alarm - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome
You need a FTP server and set FTP parameters first. Refer to Section Configuring FTP
Settings for setting FTP parameters.

Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
To trigger an alarm output when an event occurs, please refer to Section 5.2.4
Configuring Alarm Output to set the alarm output parameters.

Trigger Recording
Record a video when an event occurs.
You have to set the recording schedule to realize this function. Please refer to Section
5.1.1 Configuring Recording Schedule for settings the recording schedule.

5.2.2 Configuring Video Tampering Alarm

Purpose:
You can configure the speed dome to trigger the alarm actions when the lens is covered.
Steps:
1. Enter the Video Tampering settings interface :
Configuration > Event > Basic Event > Video Tampering
45