Dual-Vca Settings; Configuring Image Settings - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome
The number of areas supported in ROI function varies depending on the models of speed
dome.
4. Select the Region No. from the dropdown list.
5. Adjust the ROI level from 1 to 6. The higher the value, the better image quality in the red
frame.
6. Enter a Region Name.

ROI for Dynamic Region
1. Check Enable Face Tracking checkbox to enable face tracking, and the captured face picture
is set as region of interest. Adjust the ROI level from 1 to 6.
2. Check Enable Target Tracking checkbox to enable target tracking, and the target is set as
region of interest. Adjust the ROI level from 1 to 6.
3. Click Save to save the settings.

6.2.4 Dual-VCA Settings

Steps:
1.
Enter the Dual-VCA settings interface:
Configuration > Video/Audio > Display Info. on Stream
2.
Check the checkbox to enable the function of Dual-VCA which can be used cooperatively
with NVR to implement dual-VCA retrieval during playback.
3.
Click

6.3 Configuring Image Settings


On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on the models of speed dome.
Figure 6-26 Enable Dual-VCA
to save the settings.
to show the PTZ control panel or click
84
to hide it.