HIKVISION E Series User Manual page 103

User Manual of E Series Network Speed Dome
If the speed dome is connected to a public network, you should use a NTP server that has a
time synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the speed dome is set in a customized network, NTP software can be used
to establish a NTP server for time synchronization.
 Configuring Time Synchronization Manually
Steps:
(1) Check the Manual Time Sync radio button.
(2) Click to set the system time from the pop-up calendar.
(3) Click
You can also check the Sync with local time checkbox to synchronize the time of the speed
dome with the time of your computer.
 Select the Time Zone
Purpose:
When the speed dome is taken to another time zone, you can use the Time Zone function to
adjust the time. The time will be adjusted according to the original time and the time difference
between the two time zones.
From the Time Zone dropdown menu as shown in Figure 6-49, select the Time Zone in which the
speed dome locates.
Configuring DST (Daylight Saving Time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time period of a year,
to save the settings.
Figure 6-48 Time Sync Manually
Figure 6-49 Time Zone Settings
96