HIKVISION E Series User Manual page 5

User Manual of E Series Network Speed Dome
 The sensor may be burned out by a laser beam, so when any laser equipment is being used,
make sure that the surface of the sensor not be exposed to the laser beam.
 For working temperature, please refer to the specification manual for details.
 To avoid heat accumulation, good ventilation is required for a proper operating environment.
 While shipping, the product should be packed in its original packing.
 Please use the provided glove when open up the product cover. Do not touch the product
cover with fingers directly, because the acidic sweat of the fingers may erode the surface
coating of the product cover.
 Please use a soft and dry cloth when clean inside and outside surfaces of the product cover.
Do not use alkaline detergents.
 Improper use or replacement of the battery may result in hazard of explosion. Please use the
manufacturer recommended battery type.
iv
0504031060810