User Manual of E Series Network Speed Dome
surveillance area from being live viewed and recorded.
Steps:
1. Enter the Privacy Mask settings interface:
Configuration > PTZ > Privacy Mask
2.
Click the PTZ control buttons to find the area you want to set the privacy mask.
3.
Click
; click and drag the mouse in the live video window to draw the area.
4.
You can drag the corners of the red rectangle area to draw a polygon mask.
5.
Click
to finish drawing or click
saving them.
6.
Click
to save the privacy mask, and it will be listed in the Privacy Mask List area; set
the value of Active Zoom Ratio on your demand, and then the mask will only appear when
the zoom ratio is greater than the predefined value.
Figure 5-31 Draw the Privacy Mask
Figure 5-32 Privacy Mask List
to clear all of the areas you set without
62