Configuring Scheduled Tasks - HIKVISION E Series User Manual
Network speed dome
Hide thumbs
Also See for E Series:
- User manual (117 pages) ,
- Installation manual (42 pages) ,
- Quick manual (40 pages)
Table of Contents
Advertisement
User Manual of E Series Network Speed Dome
7.
Check the checkbox of Enable Privacy Mask to enable this function.
You are allowed to draw up to 8 areas for the speed dome.
5.4.6 Configuring Scheduled Tasks
Purpose:
You can configure the network speed dome to perform a certain action automatically in a
user-defined time period.
Steps:
1.
Enter the Scheduled Task settings interface:
Configuration> PTZ > Scheduled Tasks
2.
Check the checkbox of Enable Scheduled Task.
3. Set the Park Time. You can set the park time (a period of inactivity) before the speed dome
starts the scheduled tasks.
4. Select the task type from the dropdown list. You can choose scan, preset, pattern and etc.
5. Select the timeline of a certain day, click and drag the the mouse to set the recording
schedule (the start time and end time of the recording task).
6. After you set the scheduled task, you can click
(optional).
Figure 5-33 Configure Scheduled Tasks
Figure 5-34 Task Types
and copy the task to other days
63
Advertisement
Table of Contents
