Operating Ptz Control - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome

Click to select between
or Quick Time. The live video is played via webcomponents by default, and other types of
players are supported for the browser, such as MJPEG, and VLC. You are required to download
and install the player to play the live video.

Click and it displays
into . Click the icon again to stop two-way audio.

Click to start live view and the icon turns into

Click to capture the picture.

Click to start recording and the icon turns into
recording.

Click to enable digital zoom function and the icon turns into
the mouse towards low right direction to draw a rectangle on the image as the desired zoom.
After viewing it you can click any place of the picture to get back to normal picture.

Click the on the toolbar to enter the regional exposure operation mode and the icon
turns into . Then click and drag the mouse to draw a rectangle on the image as the
desired exposure region.

Click the on the toolbar to enter the regional focus operation mode and the icon turns
into . Then click and drag the mouse to draw a rectangle on the image as the desired
focus region.

Click to display the
Before using the two-way audio or recording with audio functions, please set the Stream Type to
Video & Audio referring to Section 6.2.1 Configuring Video Settings.
Please refer to the following sections for more information:
 Configuring remote recording in Section 5.1.1 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 6.3 Configuring Image Settings and
Section 6.2.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 6.3.2 Configuring OSD Settings.

4.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to control panning, tilting and
zooming.
and play the live video via player Webcomponents
. Click to enable two-way audio and the icon turns
. Drag the slider to adjust the volumn.
. Click the icon again to stop live view.
. Click the icon again to stop
. Then click and drag
20