Configuring Pppoe Settings - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome
and preferred DNS from the ISP.
 HiDDNS:
Steps:
(1) Enter the Server Address.
(2) Enter the Domain name of the camera. The domain is the same with the device alias in
the HiDDNS server.
(3) Click
 NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, enter the domain name obtained from the NO-IP website.
(3) Enter the Port of NO-IP server.
(4) Enter the User Name and Password registered on the NO-IP website.
(5) Click

Configuring PPPoE Settings

Purpose:
If you have no router but only a modem, you can use Point-to-Point Protocol over Ethernet
(PPPoE) function.
Steps:
1. Enter the
PPPoE settings interface:
Configuration > Network > Basic Settings > PPPoE
Figure 6-5 IPServer Settings
to save the settings.
Figure 6-6 HiDDNS Settings
to save the settings.
69