One-Touch Patrol - HIKVISION E Series User Manual
Network speed dome
Hide thumbs
Also See for E Series:
- User manual (117 pages) ,
- Installation manual (42 pages) ,
- Quick manual (40 pages)
Table of Contents
Advertisement
User Manual of E Series Network Speed Dome
7. Click OK to save all the patrol settings.
Calling a Patrol:
In the PTZ control panel, select a defined patrol from the list and click
shown in Figure 4-10.
4.4.5 One-touch Patrol
Purpose:
One-touch patrol is an automatically created patrol. The system automatically add preset No.1 to
No.32 to the patrol path 8. You can call the one-touch patrol and the speed dome moves as the
patrol path 8 automatically.
Steps:
1. Set preset No.1 to No.32. Refer to 4.4.3 Setting / Calling a Preset for detailed information of
setting preset.
2. Call preset No. 45, and the speed dome moves as patrol path 8.
3. Click
to enter the patrol settings interface and start/stop one-touch patrol, edit the
patrol time and the speed.
4. You can click
of the PTZ control panel to start one-touch patrol.
Figure 4-10 Calling a Preset
27
to call the patrol, as
Advertisement
Table of Contents
