HIKVISION E Series User Manual page 51

User Manual of E Series Network Speed Dome
The time of each period cannot be overlapped. Up to 8 periods can be configured for each
day.
5. Set the Alarm Actions for Motion Detection.
Click
You can specify the linkage method when an event occurs. The following contents are about
how to configure the different types of linkage method.
Check the checkbox to select the linkage method. Notify Surveillance Center, Send
Email, Upload to FTP/Memory/NAS, Trigger Alarm Output and Trigger Recording are
selectable.

Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.

Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, you need to refer to Section Configuring Email
Settings to set the Email parameters.

Upload to FTP/Memory/NAS
Capture the image when an alarm is triggered and upload the picture to a FTP server.
tab to enter the Linkage Method interface.
Figure 5-14 Linkage Method
44