Maintenance - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome

6.4.2 Maintenance

Upgrade & Maintenance
 Rebooting the Speed dome
Steps:
1. Enter the Maintenance interface:
2. Configuration > System > Maintenance > Upgrade & Maintenance:
3. Click
 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click
Clicking
address and user information. Please use this button with caution.
 Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click
importing configuration file.
You need to reboot the speed dome after importing configuration file.
to reboot the network speed dome.
or
restores all the parameters to default settings including the IP
Figure 6-52 Restore Default Settings
to select the local configuration file and then click
Figure 6-53 Import Configuration File
to restore the default settings.
98
to start