Handling Exception; Smart Event Configuration - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome

5.2.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and
illegal login to the speed domes.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section 5.2.1
Configuring Motion Detection.
3. Click

5.3 Smart Event Configuration

The functions vary depending on the models of speed dome.
Figure 5-19 Exception Settings
to save the settings.
49