Setting / Calling A Patrol - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome
You may need to use the OSD (On Screen Display) menu when controlling the speed dome
remotely. To display the OSD menu on the live view screen, you can call the preset number
95.

4.4.4 Setting / Calling a Patrol

Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.

Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from the list and click
3. Click to enter the adding interface of preset, as shown in Figure 4-9.
4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
Patrol Speed
5. Click OK to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
to enter the patrol settings interface.
Figure 4-9 Adding Presets
Description
It is the duration staying on one patrol point. The speed dome
moves to another patrol point after the patrol time.
It is the speed of moving from one preset to another.
.
26