Leds And Dip Switches Of The Repeater Module; Redundancy - Procentec ComBricks User Manual

8.8 LEDs and DIP switches of the repeater module

The LEDs on the repeater modules are very useful for visual diagnostics.
Repeater Module
status
Data received
The idle voltage
when no station is
sending is too low
Dipswitches or web
server settings

8.9 Redundancy

Refer to paragraph 7.9 for a description of the redundancy system.
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
Communication
error or bad
telegrams
Repeater internal
failure
Signal amplitude of
the telegrams
is too low
Network 1: NW0 = L, NW1 = L
Network 2: NW0 = R, NW1 = L
Network 3: NW0 = L, NW1 = R
Network 4: NW0 = R, NW1 = R
Redundancy for the
current network
95/219